+91 080 2674 4489 info@leca.in application@leca.in

Industrial Automation & Motion Controls

Home About Us

Products

Browse By Category

WEICON

KEB Automation

Omron Automation

CNC Machine

Multi Axis Controller

Industrial Automation

Measuring Instruments

Subcategories

WEICON TOOLS Technical Sprays Adhesives and Sealants Assembly Paste Grease Extra

Frequency Inverters & Servo Drives Power supply and regeneration Application solutions Accessories Predecessor products COMBILINE Filters

Servo Drives and Motors PLC and HMI Motion Controller Omron Others Industrial PC

CNC Tool Grinding Machine Industrial Walter Helitronic Tool Grinding Software Advantage 400

Geo Brick Controller Delta Tau products

AC Drives & Motors DC Drives & Motors SEW Products AXOR Products Search Light

GIVI Digital Readouts GIVI Rotary Encoders GIVI Magnetic Systems GIVI Optical Scales GIVI Position Controllers

PRODUCTS Products

View All Products

No products available in this category.

Plastics Machinery All types of extrusion machines, shredders, injection moulding machines viz. All Electric Injection molding machines, Hybrid machines. Sensorless closed loop operation Special cooling options LECA in colobration withBharat Bijlee offers solution for All Electric Injection Moulding machine and Hybrid Injection Moulding machine. For All Electric machine, the solution comprises Servo Drives on common DC bus and servo motors for all 4 axis. Servo motors are with absolute encoder feedback. Servo drives operate in position control loop thus PLC overheads are much reduced. Since, position loop is incorporated at drive end, gives better accuracy of mould positioning and ultimately better tolerance in the final product. For Hybrid Injection machine, the solution includes Servo Pump, Servo motor and servo drive. With this solution our customers have achieved energy saving up to 60-70% as compared to the conventional machine.

Textile Machinery A wide variety of Textile machines such as OE Spinning, Ring frames, Carding, Clothes manufacturing. For ring frame application proper synchronisation between main spindle drive and auxiliary ring frame, drafting unit and doffer unit is very important. This synchronisation is required even if mains power fails. KEB Drives with its unique “Power Off” function enables to achieve this requirement. Because of this function built in the drive customer avoids costly investment in Batteries and avoids break down of machine due to thread breakage.

Steel Rolling Mill Continuous Shear: Continuous shears are used in high speed bar mill. This is a low inertia shear and rotating continuously by induction motor. The divertor tube driven by servo motor is moved to cut the bar of desired length. The bar is coming continuously from the rolling mill and every time when divertor is moved the bar gets cut under the continuously rotating blades. In this case the bar is cut into pieces of desired length. The accuracy of cut length is very important. For this purpose Bharat Bijlee gives solution with BBL make induction motor fitted with absolute encoder for driving cutter blades, KEB drive with position synchronisation feature for induction motor, servo drive with servo motor for divertor tube, multi axis controller for axis control, touch screen HMI and field sensor. On sensing the front end of the bar the blade motor is put in position synchronisation with bar movement. This gives very good cut accuracy even for 1st cut.

Packaging technology Driven by the highest standard, the C6 provides repeatability , fast bus cycle times and easy handling of function blocks. Simple adjustments of electronic cams on-the-fly allow countless synchronous movements. Fast input and outputs allow print registration control and cam-switch operation, matching the application’s need. The flexibility of the system allows optimum design for your machine. The open platform allows the integration of camera systems , printers and barcode scanners. For the visualization and machine operation, a variety of HMI solutions with different IP protection classes are available, including such finishes as stainless steel. The visualisation offers a variety of options such as recipe management, web servers and data recording. CAM Curve switch, adjust curve on the fly CAM Curve online and offline processing Various interpolation methods Winding tension control with inertia compensation Print mark detection / compensation Forming / Sealing temperature control related to product and speed Synchronised dynamic filling functionality Labelling of products Cutting Capping Printing Inserting Palletising Wrapping

Test bench Bharat Bijlee offers a complete solution for Test benches. The wide range of Automation products BBL offered are VFD’s (F5) up to 900Kw.Active front end (R6) up to 800 Kw, AC Induction motors, AC Servo motors, AC Asynchronous Servo motors, PLC’s for following test bench applications. Motor test bench Engine test bench Pump test bench Gear box test bench Alternator test bench An '''engine test stand''' is a facility used to develop, characterize and test engines. The facility, often offered as a product to automotive OEM’s, allows engine operation in different operating regimes and offers measurement of several physical variables associated with the engine operation. A sophisticated engine test stand houses several sensors,[data acquisition features and to control the engine state. The sensors would measure several physical variables of interest which typically include: Torque and angular velocity Fuel consumption rates Air-fuel ratio Temperature and gas pressures Information gathered through the sensors is often processed and logged through data acquisition systems. Actuators allow for attaining a desired engine state (often characterized as a unique combination of engine torque and speed). ==Engine test stand applications== Research and Development of engines, typically at an OEM laboratory Tuning of in-use engines, typically at service centers or for racing applications End of production line at an OEM factory

KEB Operator Keypad The operator is used exclusively for the operation, remote control or networking of a COMBIVERT F5. The used semiconductors and components of KEB are developed and dimensioned for the use in industrial products. If the KEB COMBIVERT F5 is used in machines, which work under exceptional conditions or if essential functions, life-supporting measures or an extraordinary safety step must be fulfilled, the necessary reliability and security must be ensured by the machine builder. The operation of our products outside the indicated limit values of the technical data leads to the loss of any liability claims.

DM series, DA Series (AC Motors) KEB Asynchronous DM / DA servo-motors KEB Asynchronous servo-motors are universal low-voltage motors for optimum efficiency, whether for operation directly from mains or in controlled or regulated operation with COMBIVERT Drive Controllers in the Motion Control application. The motors provide a cost-effective solution for challenging drive tasks, with control from speed 0 in field weakening.

Servo Motors TA Series KEB synchronous servo-motors are permanently-excited, electronically switched synchronous motors - Made in Germany - for applications with the highest requirements in quality and positioning accuracy, but also compact and low weight. optimized for modular gear units TA Series - Made by KEB in Schneeberg   Fully integrated in the modular gear system, the TA Series is optimized for gear use and offers a wide range of universal servo-gear motors. Graded mechanically in five sizes, TA motors offer all the properties of current servo-technology in a wide range of different rated voltages and rated speeds.

Servo Motors DL2 & DL3 Series Dynamic Line DL3 Designed as a system solution with COMBIVERT S6 actuators, the DL3 series offers universal motor series with smooth surface and compact angle connectors for use in mechanical engineering. The universal winding ensures flexible use on 230V and 400V actuators. Easy installation with pre-assembled connectors form the wiring for the motor and encoder system, available in lengths of 1 to 50 m. Dynamic Line DL2 The DL2 series is designed to meet additional requirements with further rated speeds and additional encoder system options.

Application Drive – COMBIVERT F5 F5 BASIC - Standard equipment for control tasks with rated output of 0.37 to 15 kW F5 COMPACT - Universal series with extended I/O options up to 90 kW F5 MULTI - Controlled and regulated drive controllers according to the "All in one" principle for applications up to 900 kW Open-loop and closed-loop drive controller for synchronous servo motors and asynchronous motors… Wide power range for 230 V /400 V & 690V connection Either AC or DC connection Optimal characteristics at the motor shaft in different application areas with KEB-SMM (Sensorless motor management) 29 plug-in control terminals, PNP- / NPN logic switchable 2 analog inputs 0 … 10 V, ±10 V, 0 / 4 … 20 mA 2 programmable analog outputs 0 … ±10 V 8 programmable digital inputs Programmable outputs: 2 x relay, 2 x transistor 4 programmable software inputs/outputs 8 free-programmable parameter sets including S-curves, ramp stop, power-o_ -function, DC-braking, PID controller, electronic motor protection, brake control, internal counter input, output frequencies up to 1600 Hz, output voltage control, switching frequencies up to 16 kHz, output phase monitoring, energy saving function Scan time of the control terminals in 2 ms-time pattern ± DC-link connection, motor-PTC evaluation, hardware current limit Internal brake chopper (series up to housing size G, option from housing size H) Controlled positioning to end position/counter pulse Optional: execution in accordance with EN 954-1 protection category 3: protection against unintended restart  

Application Drive – COMBIVERT F6 Powerful and compact Applicable for different motor technologies and functionally prepared for the drive tasks of speed, torque and position control - these are the COMBIVERT F6 drive controllers for powers from 2.2 kW to 450 kW. They support the implementation of new machine concepts with extended requirements for performance, communication and integrated safety. With this drive generation, the operation of different motor types, real-time communication with a higher-level controller or the cooling concept in the control cabinet can be individually adapted to the requirements of the machine manufacturer.

Servo Drive – COMBIVERT S6 COMBIVERT S6 The COMBIVERT S6 is a modern, compact but flexible servo-amplifier for performance levels from 0.75kW to 7.5kW or electrical currents from 2.6A to 12.5A. Also, the drive controller provides optimum performance in torque-, speed and position control. The COMBIVERT S6 handles control for either asynchronous AC motors or synchronous servo-drives. The modular drive platform and strict consistency ensure a uniform basis throughout the range. The COMBIVERT S6 also offers a communications and safety feature designed to suit your application, to meet the demands of modern drive controllers.

Supply and Regeneration systems In addition to motor movement adapted to process variables, generator loading cycles also frequently occur with electric drives, where the energy is often "heated" in ballast circuits.  KEB supply and regeneration systems offer energy-optimized solutions for power compensation within a system or direct regeneration of excess power in the supplying network. COMBIVERT R6 – provides industrial network power regeneration in intermittent duty, typically installed as a single-axis system or in parallel connection with a regeneration choke or harmonic filters, implemented technically with block  modulation and available for outputs of 11 kW to 900 kW. AFE Solutions – provide sinusoidal network supply and network regeneration with "PFC" (power factor correction) and internal voltage boost converter. They can be used in temporary or continuous network supply and regeneration. For output up to 100kVA certification to CEI-0-21 is available.

EMC Filters COMBILINE Radio interference filters Drives with rectifier supply produce low and high frequency system interference with their pulse-type charging currents, which are limited by EMC regulations.  Compliance with standards is ensured with universal EMC filters for individual interference suppression on the drive controller or as a central filter, designed for complete installation in a control cabinet.  COMBILINE radio interference filters are designed for an industrial environment or the residential sector, and are available for rated currents up to 1,000 A.

Input/Output filters I/O filters incorporate the functions of mains supply HF filters and motor du/dt filters in a compact housing. The input filter section designed for high attenuation and low leakage current reduces line-related interference to limit value C1 according to EN 61800-3.

Harmonic Filters Harmonic filters are KEB's innovative solution to reducing network harmonics. The units can be planned simply as a power choke right from the design stage of an electrical switchboard, for compliance with many of the international standards. An entirely new internal structure results in mains-friendly energy absorption with exceptional application properties.

COMBILINE Sine Wave Filters The switching output voltages on frequency inverters generate additional losses in lines and moor windings, which can have a major impact on operational safety and service life of the motor insulation. COMBILINE sine wave filters limit loads to the admissible limit values and provide the necessary protection of enamel insulation and winding heads on long motor lines and special motors.  Protection by sinusoidal filters in retrofitting of older installed motors with frequency inverters is particularly important for optimizing the degree of efficiency of existing installations.

AC Servo System 1S-series Simplifying Motion and Safety The 1S servo drive with motion safety functionality provides protection for the machine operators from fatal injuries and shorter machine downtimes. Integrating motion safety functions into the servo drive minimize costs, components and wiring complexity. This model supports motion safety but it is even further evolved based on the concept of the standard 1S series. With the highest-level of motion control performance and safety functionality, productivity can be further improved.

G5 Series AC Servomotor/Servo Drives The G5 series has a direct connection to the NJ controller via EtherCAT. Customers can design faster, more advanced machine automation control systems. • High-accuracy positioning with fully-closed control. • Servo Drives for 400VAC globally widens applicable systems and environment, including large-scale equipment. • Safe design and Safe Torque Off (STO) function. • Vibration can be suppressed in acceleration/deceleration even in low-rigidity mechanical systems.  

G5 Series Linear Motor/Servo Drive Linear Motor for Higher-speed and Higher-precision   G5 Series Linear Motor/Servo Drives with built-in EtherCAT Communications Linear Motor Type. • Inherited functions and performance of G5 series and EtherCAT communications achieve high-speed and   high-precision positioning. • Lineup of compact and high-thrust iron-core motor type and cogging-free ironless motor type with excellent   speed stability. • Same Iron-core motor type for 200V AC and 400V AC. • Quick setup by automatic setup function.

NX Series Integration and Functionality Sysmac is an integrated automation platform dedicated to providing complete control and management of your automation plant. At the core of this platform, the Machine Controller series offers synchronous control of all machine devices and advanced functionality such as motion, robotics and database connectivity. This multidisciplinary concept allows you to simplify solution architecture, reduce programming and optimize productivity.

NJ Series A powerful and robust ONE automation platform, which is segrigated as following parts.: CPU Units The NJ-Series Machine Automation Controller is at the heart of the new Sysmac platform. Power Supply Units Powerful Power Supply Unit to supply steady electric power to NJ series controller Basic I/O Units Basic I/O Units are available for essentially any application and wiring method. Special I/O Units Special I/O and communications units for temperature control, analog control, ID sensing and other types of machine control. CPU Bus Units Special I/O and communications units for DeviceNet, serial communications, and other network communications.    

CP Series. Built-in Ethernet communication function and 4-axis positioning function to achieve high cost performance. Micro PLC ideal for controlling compact machine There are 4 products of CP Series CP series CP2E CPU Unit Micro PLC designed to support data collection and Machine to Machine communication. CP series CP1H CPU Unit 4 Axis Position Control and Comprehensive Programmable Controller CP series CP1L CPU Unit High Performing Programmable Controller with Embedded Ethernet CP-series CP1E CPU Units Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control

CJ1 & CJ2 Series. CJ1 Series The CJ1 Series of small Programmable Controllers provide all the functions required for everything from machine control to process control in a backplane-free structure that enables flexible system configuration. Power Supply Units A wide variation of Power Supply Units is available to match the scale of just about any system. Models are also available with a Replacement Notification function. CPU Bus Units CPU Bus Units handle special I/O and communications needs to achieve advanced position control, motion control, and network communications. Basic I/O Units Basic I/O Units are available for essentially any application and wiring method. Special I/O Units Special I/O Units can be used to handle advanced machine control needs, such as temperature control, position control, and communications. CJ2 Series Enhanced performance and functionality over the CJ1. A Programmable Controller that inherits all the features of the CJ1. Power Supply Units A wide variation of Power Supply Units is available to match the scale of just about any system. Models are also available with a Replacement Notification function. CPU Units Small, Fast, Flexible: The CJ2 CPU Units inherit and improve CJ1 features while also adding EtherNet/IP as a standard feature for high-speed, high-capacity Ethernet-based networking. Basic I/O Units Basic I/O Units are available for essentially any application and wiring method. Special I/O Units Special I/O Units can be used to handle advanced machine control needs, such as temperature control, position control, and communications. CPU Bus Units CPU Bus Units handle special I/O and communications needs to achieve advanced position control, motion control, and network communications. Communications Coupler Coupler Unit which enables EtherCAT or EtherNet/IP network communications.  

CS1 Series CS1 Series The CS1 medium-sided building-block PLCs can be configured from a wide array of CPU Units, Special I/O Units, and CPU Bus Units. It handles everything from machine control to process control. CS1G, CS1H Overview From Machine Control to Information Management Multiple-application Controllers with a Wide Range of Functions CS1D Overview Redundant CPU Units, Power Supply Units, Communications Units, and Expansion I/O Cables Basic I/O Units Basic I/O Units are available for essentially any application and wiring method. Special I/O Units Special I/O Units can be used to handle advanced machine control needs, such as temperature control, position control, and communications. CPU Bus Units CPU Bus Units handle special I/O and communications needs to achieve advanced position control, motion control, and network communications. Communications Coupler Coupler Unit which enables EtherCAT or EtherNet/IP network communications.

NA Series The Omron Sysmac HMI enables faster, more efficient control and monitoring - and a more natural, proactive relationship between operator and machine. Wide screen models: 7, 9, 12 and 15 inches

NB Series The future-proof, compact HMI Give more value to your machines with Omron’s NB Series: compact range application HMI. Enjoy his the aesthetic sense and excellent visibility. Our expertise in Factory automation give you warranty of quality and a total freedom to build up optimal applications. Newly added remote control features help to reduce the time and work involved in maintenance. Quality color display with LED backlighting. Complete HMI family. Comprehensive features.

NS Series NS, the HMI brand you can rely on Machine Control at Your Fingertips. On-screen Machine Management. Even Simpler Equipment Operation with Outstanding Synergy.

NV Series The NV Series of compact Programmable Terminals meet the basic needs for enhanced visibility, simplicity, and cost, and they go even further to provide superior PLC compatibility, easy operation, and cost performance. Compact and Simple, Extremely High Cost Performance. The Best PT for Package PLCs

NT20, NT31(C)-EV3, NT631C-EV3  Device monitoring and I/O comment loading functions facilitate system construction.  • Greatly enhanced NT Support Software with reusable screen data and powerful simulation on editing screens.  • Transfer the system program and screen data to ensure smooth on-site system maintenance and improve the efficiency of onsite work.  •Wide Range of Communications Interfaces.

CK3E Motion controller In order to achieve this, Omron and Delta Tau Data Systems, Inc. are working together as one Omron Group to improve sophisticated Motion Control and Programmable Logic Control systems. These are the systems that are required for the next generation's automation systems around the world. By combining global leading Delta Tau Data Systems' Motion Control technologies, Omron ILO+S (Input, Logic, Output, and Safety) control technologies can open up new applications and solutions. The CK3E is a controller designed for precise multi-axis control. You can build a system capable of controlling up to 32 axes of motion and incorporate customized control algorithms into the system. The CK3E allows you to program in C language and reuse existing software assets. The compact design saves space in machines and control panels. EtherCAT® connects servo drives, I/O, and other devices to the CK3E, reducing the number of cables.

OMRON Sensor OMRON Sensing Components detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance. They also contribute to predicting and preventing future events. Fiber Sensors Photoelectric Sensors Displacement Sensors / Measurement Sensors Vision Sensors/Machine Vision Systems Code Readers/OCR Proximity Sensors Photomicro Sensors Rotary Encoders Ultrasonic Sensors Pressure Sensors Contact Sensors/Liquid Leakage Sensor Condition Monitoring Sensors

Multi-function Compact Inverter Amazing in Control High starting torque and torque control capability in open loop mode give you full control of your machine dynamics and performance. Options for all of the major open network systems. Torque master The MX2-V1 delivers 200% starting torque near stand-still (0.5 Hz) and can operate in torque control in open loop mode. This allows the MX2-V1 to be used in applications where closed loop AC vector drives were previously used. Easy network integration Standard industrial networks, such as EtherCAT, CompoNet or DeviceNet as options. High-speed EtherCAT provides solutions for the entire system from input to output with Sysmac Series. Easy communications setting Built-in RS-485 Modbus communications. OMRON Function Blocks are available for the CP H/L and CJ-series PLCs. Those control the MX2-V1 via Modbus communications easily. Safety in Control Safety is embedded in the MX2-V1, according to ISO 13849-1, Cat. 3, with two safety inputs and an External Device Monitoring (EDM) output. No external contactors on the motor side are required, meaning simpler wiring for the user. Safety embedded; ISO 13849-1, Cat. 3 Dual contactors at the output of the inverter are no longer required. Direct connection to a safety controller ensures compliance to ISO 13849-1 Cat.3 PLd. Safety function: IEC 61800-5-2 “Safe Torque Off (STO)” MOTOR CONTROL Permanent magnet motors The PM motor conforming to high-efficiency regulations can be controlled. The PM motor promotes further energy saving and achieves earth-friendly machine control. Position and run! The MX2-V1 is a drive and position controller in one, ideal for modular machines where moderate positional accuracy is required. Speed synchronisation is also possible, with no additional programming required. Speed synchronisation With no external hardware required, and via standard parameter settings, speed synchronisation can be achieved. The MX2-V1 will act as a speed follower to an external pulse generator/encoder signal up to 32 KHz. Positioning functionality Specially developed application functionality enables the MX2-V1 to solve simple positioning tasks without the need for an external controller. Up to 8 positions, plus home, can be selected by the user, and furthermore, the MX2-V1 can be switched between speed and position mode. Program and play! The MX2-V1 gives you the power to create smart solutions using PLC functionality, as standard. Via an intuitive flow chart programming tool, you can create programs with up to 1000 lines of code and with 5 tasks running in parallel. Free to program   • Intuitive and user friendly flow chart programming • Integrated in CX-Drive • Up to 1000 lines in a program • 5 tasks can run in parallel    (CX-Drive version 2.80 or higher is required.)

High-function General-purpose Inverters Save energy and maximize performance with versatile inverter Easy replacement The RX2 Series with the same mounting dimension as the previous model will fi t in the existing control panel or mounting location. In addition, the same setting software CX-Drive can be used for the RX2 Series. Parameter settings and programs used for the previous model can be easily converted and transferred to the RX2 Series. Note: The depth of some models may vary

NY5 Series NY5[][]-1 [Industrial PC] IPC Machine Controller Perfect fusion: Sysmac machine control and IT technology Designed specifically for machine usage, making them innovative yet reliable, the IPC Machine Controller combines the precision and utility of the Sysmac platform with the versatility and range of Windows programs. The two platforms operate simultaneously but separately, so if Windows is down, the machine just keeps on working. As a result, engineers become unstoppable - empowered to explore manufacturing innovation by leveraging big data, NUI (Natural User Interface) and IoT (Internet of Things) initiatives, all without compromising proven PLC reliability and robustness. NY5[][]-Z[]00 AI and IoT help people and machines grow together at future factories While manufacturing are rapidly becoming more advanced, the world faces a shrinking labor force and shortage of skilled engineers. Omron will realize a factory of the future where people and machines grow together by leveraging AI and IoT technologies at the machine level and converting tacit knowledge, such as intuition and experience of experts, into explicit knowledge. Omron is aiming for a future factory realized by our system using AI controller NY53[]-5[]00 Three benefits from NC Integrated Controller [Minimize machine cycle time] NC and PLC functionality fully synchronized at high speed Efficient control of processing and other processes is crucial to performance and productivity of a multi-purpose machine which handles multiple processes. The NC integrated controller provides both NC and PLC functionality and synchronize all devices at high speed, significantly reducing the machine cycle time.

NYB, NYP & NYM Series Industrial PC Powerful. Tough. Future proof. Powerful, reliable, scalable - and tough as they come Our NY Industrial PC has been designed from first principles to be powerful, reliable and scalable, making it ideally suited to visualization, data handling, measuring and controlling. We’ve simplified the design and build to eliminate faults caused by complexity and, with other unique design features, to maximize uptime and reduce costs. The future will be IT driven: Omron’s IPC platform will make you part of it.

NY51[]-A High-speed, high-precision motion controller plus PC - in one box The IPC Programmable Multi-Axes Controller offers exceptionally precise motion control, with proven technology from Omron's Delta Tau Data Systems, Inc. It was developed to help manufacturers boost both their productivity and their manufacturing quality, delivering world-beating*1 output speeds allied to exception precision. It comes equipped with Windows real-time operating systems which, combined with powerful control capability, provides exceptional flexibility. And it's not just superior motion control: it also enables the creation of high-resolution graphics as well as customized applications for high-end production requirements. The system can perform predictable motion control while running intensive data-handling applications and, uniquely, will continue with motion control tasks even if the OS stops working.

CNC TOOL GRINDING MACHINE From our extensive range of machinery, we manufacture, export and supply supreme quality CNC Tool Grinding Machine. For the manufacturing of this machine, our professionals use superior quality components and pioneering technology in sync with the defined international standards. Specially designed to bend stiff and hard material pipes into small radius with ease, the offered CNC Tool Grinding Machine is available in varied models and specifications as per the application requirements of customers at reasonable rates. 

Industrial Walter Helitronic Owing to our expertise in this domain, we are engaged in presenting excellent quality Industrial Walter Helitronic 45 that can be availed with direct attachment on the shaft for use of diamond wheels. The offered machine is manufactured by making use of optimal quality raw material and latest technology under the expert’s supervision. Provided machine is also tested on various parameters to ensure its high performance. Apart from this, Walter Helitronic is available in various specifications as per the application needs of clients.

TOOL GRINDING SOFTWARE TOOL GRINDING SOFTWARE We are an eminent name in the market as leading manufacturer, exporter and supplier of high performing Tool Grinding Software. Our offered software is commonly used for manufacturing and sharpening drills and milling cutters. Precisely designed and developed in our technically sound manufacturing unit using superior quality components under the guidance of our deft team of professionals, the provided software is available in different models to meet the desired needs of our clients. Further, Tool Grinding Software can be availed from us at industry-leading prices.

ADV 400 The ADVANTAGE 400 is a CNC system up to 5 axis. +/-10V as well as stepper output is available. The system is based on the powerful PMAC2 axis controller in association with an embedded PC104 computer. The front panel includes a flat screen, F-keys and keyboard for easy programming, debugging and management of the machine. The back panel includes all connectors for an easy and complete machine connection Advantage 400 UNIVERSAL MOTION CONTROLLER UP TO 5 AXES DELTA TAU’s PMAC2 TECHNOLOGY POWERFUL AXES CONTROLLER CPU EMBEDDED PC104 COMPUTER COMPACT OPERATOR PANEL SOFT PLC IEC 1131

Geo Brick Controller The Geo Brick Drive combines the intelligence and capability of the Turbo PMAC2 motion controller with IGBT-based drive technology, resulting in a compact, smart 4-, 6- or 8-axis servo drive package. The flexibility of the Turbo PMAC2 enables the Geo Brick to drive Brush, Brushless or AC induction motors with unsurpassed pure digital DSP performance. The absence of analog signals – required for typical motion controller/drive interfacing – enables higher gains, better overall performance and tighter integration, while significantly driving down costs and setup time. The Geo Brick’s embedded 32-axis Turbo PMAC2 motion controller is programmable for virtually any kind of motion control application. The built-in software PLCs allow for complete machine logic control. The Geo Brick Drive supports the following types of motors: Three-phase AC/DC brushless, servo, synchronous rotary/linear; DC brush; AC Induction, asynchronous –with or without encoder. The Geo Brick Drive also supports the following feedback types: Digital A Quad B; SSI; EnDat 2.2; BiSS B/C; HiperFace; Tamagawa; Panasonic; Sinusoidal; Resolver; Interferometers: Sinusoidal and Parallel; LVDTs, RVDTs, MLDts; Potentiometers.

Turbo Clipper The Turbo ClipperTM controller (Turbo PMAC2-Eth-Lite) from Delta Tau provides a very powerful, but compact and cost-effective, multi-axis controller solution for cost sensitive applications. The Turbo Clipper is a full featured multi-axis controller with Ethernet (100 Mbit/sec), USB (2.0), and RS232 communication ports and built in I/O. It offers a full Turbo PMAC2-CPU and provides a minimum of four axes of servo or stepper control, a full compliment of motor I/O flags (5 in, 2 out), and 32-digital I/O points. The Turbo Clipper can be used completely standalone, with occasional commands from a host computer or PLC, or with real-time high-speed streaming of data over the Ethernet link. The Clipper can supply the most demanding of applications at a fraction of the cost previously possible.

POWER CLIPPER Utilizing a cost-effective Linux-based CPU, the Power Clipper will give you all the software and motion features from the Power PMAC within a low-cost, embedded solution.

BL52/BL50 AC VARIABLE FREQUENCY DRIVES In most industries that use motors for machinery there is a need for automation to achieve higher productivity, improve overall equipment efficiency and save energy. This is achieved by interfacing motors with AC Variable Frequency Drives that can vary the speed and torque of the motor to meet the application demand, besides reducing starting current kick and providing protection to the motor. Many customers prefer combination package of motor and Variable Frequency Drive. It also ensures a single window for installation support, on-site service, repair, product training and provision of spares. In order to meet growing demand of customers, we have introduced BBVERT BL52 and BL50 compact vector controlled AC VFDs that offer excellent reliability and superior performance. BL52 Drives are available from 0.4kW (1HP) to 110kW (150HP) in 3 phase/400V class range. For very low power applications BL50 series is available from 0.2kW (0.25HP) to 3.7kW (5HP) in 230V class (single phase/three phase) and from 0.4 kW (0.5HP) to 3.7kW (5HP) in 400 V class (three phase). BL52 drives can be used for a variety of applications - fans, blowers, pumps, mixers, plastic machinery, conveyors, textile machinery, packaging machinery and more. Both BL52 and BL50 Drives are available through our sales partners and supported by our service centers across India.

AC Motors (LOW Voltage Motors) Bharat Bijlee is one of the leading Electrical Motor manufacturers in India. It offers a comprehensive range of highly reliable and energy efficient 3 Phase AC Electrical Rotating Machine from 0.12 kW to 1250 kW. The industrial sector accounts for over half the total electricity consumption, of which 60 to 70% is utilized by electric motors. This indicates that the electric motors consume more energy than any other application. Product Capability: Motors conform to relevant IS/IEC standards Customized motors designed & manufactured to suit application specific needs The most suitable solutions to extremely harsh and severe applications Motors suited for all applications i.e. Pumps, compressors, fans & blowers, conveyors, lifts, screen, vibrators, centrifuges, stone crusher and many more Preferred brand across multiple sectors like cement, construction, steel, food & beverages, water & wastewater, sugar & distilleries to name a few    

AC Motor(Medium Voltage Motors) Bharat Bijlee is counted as a forerunner in HV and MV motors manufacturers in India. These motors are manufactured using Bharat Bijlee's tried and tested DCCA technology, offering high performance and better reliability with the use of dual cooling circuits. These HV and MV motors are suitable for use in various industrial sectors such as Power Generation, Mining, Chemical, Cement, Iron and Steel, Paper and Pulp, Water, Waste Water treatment etc. The motors can serve various applications such as Pump, Compressor, Conveyor, Mill, Fan, Blower, etc. Bharat Bijlee uses a new efficient cooling system called Dual Circuit Cooling Arrangement (DCCA) for all its High Voltage motors in frame 315 and above. This technology consists of two independent cooling systems which improves the overall cooling of the motor. The primary cooling circuit is the regular stator casing with cooling fins. The shaft mounted external fan blows air over the body fin and cools the motor by forced convection and radiation. The secondary internal cooling circuit consists of rotor with vent holes, an impeller and ventilating passage on the stator body. The air inside the motor is circulated by the impeller which passes through the ventilating passage where it gets cooled on its way from non-driving end to the driving end by the primary circuit. This cool air then passes over the DE overhangs and through the rotor vents to the non-driving end and on its way absorbs heat from the overhangs and from the rotor. This heated air again passes through the impeller to the ventilating ducts and the cycle repeats. Availability and Reliability are two words that we absolutely abide by at Bharat Bijlee. Our commitment to customer satisfaction makes us one of the most trusted MV motor manufacturers in India.

SynchroVERT® IE4 Motors SynchroVERT® IE4 Motors Our new SynchroVERT® range of IE4 motors combines high efficiency with a host of technologically superior features. Bharat Bijlee is the first in India to manufacture and introduce Super Premium Efficiency IE4 motor. Branded as SynchroVERT® our range of IE4 motors combine high efficiency with a host of technologically superior features. Electric motors are estimated to consume about 65% of the electrical energy consumed by industry. Moreover, energy costs over the typical life cycle of a motor can be as high as twenty times the original capital cost of the motor. Energy efficient motors thus offer an opportunity to significantly reduce energy costs and their collateral environmental effects. Increasingly, there is a strong economic-and environmental-case for choosing high efficiency motors over conventional ones. Instead of repairing or rewinding a failed motor, organizations may profitably consider replacing them with energy efficient motors or motor driven systems that can bring about significant reduction in energy consumption.  

PL/X SERIES The PL/X series DC Drive is a fully digital DC drive system providing 5kW – 980kW output power. Available in 2Q (single direction) and 4Q (fully regenerative) variants, the range comprises 5 compact chassis sizes with models rated from 12A to 2250A output current.  The PL/X boasts an extremely versatile operating input voltage range of 12V – 500VAC as standard. Options are available for 600V and 690VAC input.

PMDC Motors A PMDC motor does not have a field winding on the stator frame, instead relying on PMs to provide the magnetic field against which the rotor field interacts to produce torque. Compensating windings in series with the armature may be used on large motors to improve commutation under load. Because this field is fixed, it cannot be adjusted for speed control. PM fields (stators) are convenient in miniature motors to eliminate the power consumption of the field winding. Most larger DC motors are of the "dynamo" type, which have stator windings. Historically, PMs could not be made to retain high flux if they were disassembled; field windings were more practical to obtain the needed amount of flux. However, large PMs are costly, as well as dangerous and difficult to assemble; this favors wound fields for large machines. To minimize overall weight and size, miniature PM motors may use high energy magnets made with neodymium or other strategic elements; most such are neodymium-iron-boron alloy. With their higher flux density, electric machines with high-energy PMs are at least competitive with all optimally designed singly fed synchronous and induction electric machines. Miniature motors resemble the structure in the illustration, except that they have at least three rotor poles (to ensure starting, regardless of rotor position) and their outer housing is a steel tube that magnetically links the exteriors of the curved field magnets.

Universal (AC/DC) Motors The universal motor is often referred to as an AC series motor. The universal motor is very similar to a DC series motor in construction, but is modified slightly to allow the motor to operate properly on AC power. This type of electric motor can operate well on AC because the current in both the field coils and the armature (and the resultant magnetic fields) will alternate (reverse polarity) synchronously with the supply. Hence the resulting mechanical force will occur in a consistent direction of rotation, independent of the direction of applied voltage, but determined by the commutator and polarity of the field coils. Universal motors have high starting torque, can run at high speed, and are lightweight and compact. They are commonly used in portable power tools and equipment, as well as many house hold appliances. They're also relatively easy to control, electromechanically using tapped coils or electronically. However, the commutator has brushes that wear, so they are much less often used for equipment that is in continuous use. In addition, partly because of the commutator universal motors are typically noisy. Even when used with AC power these types of motors are able to rotate at a frequency well above the mains supply frequency, and because most electric motor properties improve with speed, this means they can be lightweight and powerful. However, universal motors are usually relatively inefficient- around 30% for smaller motors and up to 70-75% for larger ones.

SEW MOVIMOT SEW-Eurodrive delivers the industry’s broadest range of drive solutions from proven electro-mechanical drives to sophisticated electronic controls. Our modular approach affords our customers the flexibility to create more than 1.2 million custom configurations to meet their individual application needs. All SEW-Eurodrive systems and components are designed for seamless integration. Our knowledge of the entire drive package, from gear reducers to adjustable speed drives, electric motors, brakes, and electronic controls translates into peace of mind for customers who want dependable quality and single source responsibility.

Minispeed (MS) Eurocard | Miniclamp (SHR) Minispeed is an modular analog servo drive on Eurocard format (100x160mm | 8-12TE), with 63-200Vdc power supply for DC motors up to 15Nm. Produced since 1990 | More than 1,000,000 pieces sold worldwide! Spare parts available! Perfectly interchageable with similar Eurocard servodrives. Axor Industries’ Minispeed is a modular DC Brushed Servo Drive in Eurocard pcb format suitable for low power DC servomotor applications. This variable speed drive for permanent magnet DC servo motors is available with 3 different frame sizes for DC brushed servo motors up to 15Nm: Size 60, 140, 200 Supply range from 20Vdc to 275Vdc Motor armature voltage from 12Vdc to 200Vdc Nominal Current from 2A to 25A Peak current from 4A to 50A

Mack Drive + Mack Power (MKD+MKP) Multiaxis Brushless System Multi-axis system with a single power unit that offers centralized drive setup and control, reduction of heat stress on the drives and a common braking resistance. It is especially suited to applications involving 3 to 12 drives. The flexiblity of the hardware enables countless solutions and the customer-specific software can be factory loaded or easily downloaded on demand for optimum stock management.

Mack Indy (MKYD) Stand Alone Brushless Servo Drive Brushless drives powered directly from a 230Vac single phase mains, for motors up to 11Nm. A truly flexible standalone drive for all servo requirements. It is compact and reliable, ideal for one or more axis machinery and articulated workstations or lines.

Magnum 400 (M400) Digital brushless servo drive with 230-480Vac supply, for motors up to 32Nm. Axor Ind.’s answer to the need for a servodrive designed with the robust, reliable construction to control a wide range of motor torques. It can be configured to control any brushless servomotor and is optimized for combination with the SSAX seriesBest regards.

MiniMagnum (MM) Digital brushless servodrive with 100-480Vac mains supply, for motors up to 7.5Nm. A truly versabile servodrive, ideal for any application. It can be configured to control any brushless servomotor and is optimized for combination with the SSAX series.

MicroB NET (MCBNETA) (MCBNETD) Analog and digital servo drives for brushless motors of the Axor Ind. Classics line. An important aspect of AXOR IND. is that most products since 1988 can still be supplied today.

Masterspeed (MTS) | CD180 (CD180) Analog servo drives for dc motors of the Axor Ind. Classics line. An important aspect of AXOR IND. is that most products since 1988 can still be supplied today. Analog standalone servo drive, with 110-170Vac supply, for dc motors up to 30Nm. Built-in supply circuitry Built-in braking circuit and resistors Cooling fan (if required)

Microspeed (MCS) | Microspeed Plus (MCSPLUS) MICRO B (MCB) and MICRO B PLUS (MCBPLUS) Panel mount analog DC motor servo drive with 20-275Vdc supply, for motors up to 11Nm.

Mack Motor (MKM) Brushless Servo Motor A very robust, high performance, low noise motor for AC three phase voltage supplies. Engineered & designed to meet axis control applications up to 11Nm. Compact dimensions and long-term reliability.

Mack Basic Motor (MKBM) Brushless Servo Motor A very robust, high performance, low noise motor for DC voltage supplies. Engineered & designed to meet axis control applications up to 1.3Nm. Compact dimensions and long-term reliability. Mack Basic Motor is available with absolute multiturn BISS encoder feedback (Serial Synchronous Interface) which allows the designer greater flexibility in choosing the drive.

Security Search Light A searchlight ( or spotlight) is an apparatus that combines an extremely bright source ( Halogen lamp)  with  a  mirrored parabolic reflector to project a powerful beam of light, mounted on a motor for a 340 Deg. of rotation.

VISION VI-700 Compact-design, modern and functional digital readout. Diagnostic of readout and optical scales. Resolutions up to 0.5 μm. Reading of coded references. Universal software for any kind of machine tool. Software upgrade through serial port. 1,000 memory blocks. Option: flush-mounted version (on a panel). Easy and immediate use of several dedicated functions. Main Functions SELF-TESTING DEVICE DIAGNOSTIC INVERSION OF COUNTING DIRECTION ABSOLUTE/INCREMENTAL COUNTING MM/INCH CONVERSION RADIUS/DIAMETER CONVERSION VARIABLE RESOLUTION SCALE ZERO REFERENCE (REF) MEMORY CLEARING POSITION RESET/PRESET ANGULAR READING SEXAGESIMAL DEGREES READING CALCULATOR AXIS COUPLING W AXIS DISPLAYING SPECIAL FUNCTIONS RECALL 100 TOOL OFFSETS 100 ORIGINS OF THE AXES ZERO APPROACHING ALERT SETTING THE TYPE OF SPINDLE ROTATION SPEED CONSTANT PITCH INCLINED CONSTANT PITCH LINEAR CORRECTION NON-LINEAR CORRECTION SCALE FACTOR CIRCUMFERENCE CENTER MIDPOINT CALCULATION MIRROR IMAGE ROUND FLANGE SPECIAL ROUND FLANGE PROGRAMMING THE MEMORY BLOCKS SERIAL OUTPUT RS-232 SETTING PRINTING LINE SPACINGS ENABLING THE AUTOMATIC TRANSMISSION OF POSITIONS BUZZER ON/OFF FUNCTIONS OF THE LCD VERSION (VI700 L) LANGUAGE SELECTION TAPER CALCULATION AUTOMATIC TAPER CALCULATION THREADS CALCULATION MATERIAL WEIGHT CALCULATION PERIPHERAL SPEED CALCULATION ANGULAR SPEED CALCULATION SCALE FACTOR DISPLAYING AXES SPEED DISPLAYING RECALLED ORIGINS/TOOLS DISPLAYING

VISION VI-518 VI 518 Single-axis digital readout, for absolute and incremental systems Compact-design, single-axis digital readout, equipped with the new Absolute Warning System (AWS). AWS constantly guarantees the correctness of the displayed positions and informs the operator of any malfunctioning. The user can continue machining or, based on the error message displayed, intervene to restore the proper functioning of the system. Suitable for several machine tools, such as those performing cutting or machining at a preset size, polishing, bending, grinding or straightening. Applicable on various industries, such as wood, sheet metal, marble, rubber, textile and automation. Absolute (SSI protocol) or incremental encoder input signals. Up to 8 digits displayed, including floating decimal point and negative sign. Device diagnostic. Internal rewritable memory. Absolute signals RS-422: Clock+, Clock-, Data+, Data-. Resolutions up to 0.5 μm. Correction factor, angular reading, programmable relay outputs and many other functions available. Serial output RS-232, for the transmission of positions. Panel mountable version available.

VISION VI-900 VI 900 Multi-axis digital readout, with touch-screen color LCD, for absolute and incremental systems Compact-design, modern and functional digital readout, equipped with the new Absolute Warning System (AWS). AWS constantly guarantees the correctness of the displayed positions and informs the operator of any malfunctioning. The user can continue machining or, based on the error message displayed, intervene to restore the proper functioning of the system. Absolute (SSI protocol) or incremental encoder input signals. 5.7” touch-screen color, LED-backlit, LCD TFT panel which allows the displaying of up to 4 axes. USB, Touch Probe, CAN bus and serial RS-232 interfaces. Resolutions up to 0.1 μm. Online HELP. Graphic visualization of function execution. Diagnostic of readout and encoders. Reading of coded reference indexes. Absolute signals RS-422: Clock+, Clock-, Data+, Data-. Universal software for any kind of machine tool; updates through serial port. 1000 memory blocks. Possibility of connection to a digital (up to 8 relay outputs) or analog (constant surface speed) remote board. Option: flush-mounted version (on a panel).

ACCESSORIES FOR DIGITAL READOUTS Supporting Arms MOD. 1 Vertical fixing MOD. 2 Vertical fixing with single hinged arm MOD. 3 Wall fixing with single hinged arm MOD. 4 Surface fixing with single hinged arm MOD. 5 Wall fixing with double hinged arm MOD. 6 Surface fixing with double hinged arm MOD. 7 Surface fixing MOD. ARGO Vertical fixing on round bar Ø 25 mm

EN 58 Incremental encoder Ø 58 mm Incremental rotary encoder, based on optical principle. Small overall dimensions for applications with limited installation space. Wide range of pulses per revolution up to 64,000 ppr. Bidirectional signals with zero references, TTL or 1 Vpp sine wave. Output by connector or cable, radial or axial position. Aluminium flange and body. High-protection ring. High accuracy and stability of signals. Protected against inversion of power supply polarity and short circuits on output ports. Wide range of features. Custom-made features on request. General Catalogue

AEN 58 AEN 58 Absolute encoder Ø 58 mm Compact-design absolute rotary encoder, based on optical principle. Singleturn resolution up to 17 Bit. Multiturn resolution up to 12 Bit. High accuracy and stability of signals. Linearity ± ½ LSB (± 1 LSB for resolutions > 13 Bit). Serial interface (SSI-BiSS, with or without 1 Vpp analog signal), Fieldbus (CANopen, Profibus, DeviceNet) or Parallel. Several flanges available. IP 67 protection class available. Aluminium flange and body. Axial or radial output (with connector or cable). High rotational speed (up to 12,000 rpm). Diagnostics: warning, LED indication, temperature measurement, alarm bit.

EN 30 & EN 38 EN 30 Incremental encoder Ø 30 mm Compact-design incremental rotary encoder, based on optical principle. Output by sealed cable in radial or axial position. High accuracy and stability of signals. Protected against inversion of power supply polarity and short circuits on output ports. EN 38 Incremental encoder Ø 38 mm Compact-design incremental rotary encoder, based on optical principle. Output by sealed cable in radial or axial position. High degree of robustness. Aluminium flange and body. High accuracy and stability of signals. Protected against inversion of power supply polarity and short circuits on output ports.

EN 413 EN 413 Incremental encoder Ø 41.3 mm Compact-design rotary encoder, based on optical principle. Bidirectional signals with reference index. Up to 500 pulses per revolution. High accuracy and stability of signals. Zamak flange and body. Cable output in radial position.

VN 413 VN 413 Incremental encoder Ø 41.3 mm Incremental bidirectional encoder which allows to manually vary axis shifting typically on CNC operating machines. Up to 3,600 pulses per revolution. Absolute version available, with Parallel, SSI, CANopen, Profibus-DP interfaces, up to 17 Bit. Cable output (in radial position) or terminal board. Available with round flange (VN 413 FT) or with square flange (VN 413 FQ). Knob available in silver or dark grey color. General Catalogue

ACCESSORIES FOR ROTARY ENCODERS Encoder Support Wire Systems Shaft-Encoder Couplings Metric Wheels  

MTS & MTV Series MTS Incremental magnetic sensor with square-wave output New line of magnetic sensors MTS, with small overall dimensions. Resolutions up to 0.5 μm programmable (Pr) via serial line. DPI resolution and inches reading now available. Many pole pitches available. Wide alignment tolerances and sensor/magnetic band distance up to 12 mm, for an even easier and faster mounting. Reference indexes in required positions (with magnetic bands MP200Z, MP500Z and MP600Z). Magnetic sensor body made of die-cast metallic material. Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws. Protected against inversion of power supply polarity and short circuits on output ports. MTV Incremental magnetic sensor with sine-wave output (1 Vpp) New line of magnetic sensors MTV, with small overall dimensions. Resolutions up to 0.1 μm. DPI resolution and inches reading now available. Many pole pitches available. Wide alignment tolerances and sensor/magnetic band distance up to 5 mm, for an even easier and faster mounting. Magnetic sensor body made of die-cast metallic material. Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws. Protected against inversion of power supply polarity and short circuits on output ports. General Catalogue

Magnetic Ring (MR) & Magnetic Band(MP) MR Magnetic ring for MTS and MTV sensors MAGNETIC RING made of a magnetized ferrite ring with pole pitch of 2+2 mm or 5+5 mm, mounted on an aluminium flange for an easy application on the machine. MP Magnetic band for various applications Absolute or incremental magnetic band, composed by a magnetized plastoferrite strip, supported by a stainless steel carrier on which a double-sided tape is pre-mounted, for an extremely quick sticking and an easy fixing.  

ACCESSORIES FOR MAGNETIC SYSTEMS Stainless steel protective cover Non-magnetic stainless steel cover on which a double-sided tape is pre-mounted for a quick sticking and an easy fixing on the magnetic band. Aluminium support To be fixed on the machine to protect the magnetic band. External zero reference for magnetic band To be used with MTS and MTV sensors, in E version. External zero reference for magnetic ring To be used with magnetic ring MR 200 and MR 500.

GVS 200 Series Self-aligned incremental optical scale, with glass grating   Optical incremental scale with glass measuring support, particularly suitable for applications on synchronized press brakes. Reader head guided by a self-aligned and self-cleaning sliding carriage with spring system. Resolution up to 0.1 μm. Accuracy grade ± 2.5 μm in the standard version and ± 1 μm in the high-accuracy version. Metrological certificate provided with each scale. Reference indexes at coded distance or selectable every 10 mm along the entire measuring length, with Zero Magneto Set device. The adjustable cable output and the selectable zero references make the scale SYMMETRIC and applicable to both columns of the press brake. Safety limit switches, positionable at both ends. Sealing lips for the protection of the grating, made of special elastomer resistant to oil and wearing. Various possibilities of application, with double-effect joint or steel wire. An adapter guarantees the compatibility with PBS-HR scale. High accuracy and stability of signals even in case of high speed, strong accelerations and vibrations. Moulded M12 connector (IP 67) or other models on request. Protected against inversion of power supply polarity and short circuits on output ports.

GVS 300 & GSV 400 Series GVS 300 Incremental optical scale of small overall dimensions Small-size incremental scale, for applications with limited installation space. Possibility of registration which simplifies alignment and allows the use on rough surfaces (retrofitting and machines for which application was not foreseen). Resolutions up to 0.1 μm. Accuracy grade ± 5 μm. Two sealing lips made of special elastomer resistant to oil and wearing, for an excellent protection of the grating. Reference indexes at constant step, in central position or in different positions at request. Wide alignment tolerances. High stability of LINE DRIVER signals. Linear thermal expansion coefficient λ = 10.6 x 10-6 °C-1 suitable for the application. Protected against inversion of power supply polarity and short circuits on output ports. GVS 400 Incremental optical scale for various applications Small overall dimensions. Rugged and heavy profile with a wide cross-section. Dimensions 39×23 mm. Resolutions up to 0.1 μm. Accuracy grade ± 5 μm. Four sealing lips made of special elastomer resistant to oil and wearing, for an excellent protection of the grating. In modular version for measuring lengths over 6,500 mm, or for lower measuring lengths on request. Reference indexes at constant step, in central position or in different positions at request. Wide alignment tolerances. High stability of LINE DRIVER signals. Armored connecting cable without external connections. Connector inside the transducer. Linear thermal expansion coefficient λ = 10.6 x 10-6 °C-1 suitable for the application. Full possibility to disassemble and reassemble the scale. Protected against inversion of power supply polarity and short circuits on output ports.  

AGM Series AGM Absolute magnetic sensor with serial interface SSI-BiSS or CANopen Linear magnetic sensor, with direct reading of the absolute position. High performance, with a measuring length up to 30,000 mm. Resolutions up to 1 μm and repeatability ± 1 increment. Extremely easy and fast mounting of the entire measuring system, with wide alignment tolerances and sensor/magnetic band gap up to 1 mm. Serial interface SSI-BiSS (with or without 1 Vpp analog signal) or CANopen. SSI or CANopen protocol and programmable resolutions. Profibus-DP, Profinet, DeviceNet, ModBus and DRIVE-CLiQ protocols, through conversion gateways. High-speed serial data transfer. Small-sized, for applications with limited installation space. Magnetic band width 10 mm. Insensitive to dust and liquids (IP 67 protection class). Magnetic sensor body made of die-cast metallic material. High signal stability, even with high speed and accelerations. Cable suitable for continuous movements. Axial or radial cable output. Protected against inversion of power supply polarity and short circuits on output ports. Warning indication through LED.

THESI 310 & THESI 320 THESI 310 Single-axis position controller THESI 310 position controller can control shifting and positioning of one axis in 3 different operating modes: – MANUAL, by keyboard; – SEMI-AUTOMATIC, by keyboard; – AUTOMATIC, on the basis of a memorized program. Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position (the program cycle is composed by the position and its respective repetitions). 90 Vac to 230 Vac power supply or 24 Vac power supply with selector. Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in single-chip mode. Optoisolated inputs: START, STOP, INCREASE CYCLE, DEVIATION, PRESET. Voltage-free contact outputs: ENABLING WITH CONTROL INTERLOCK, OK POSITION, FEED / BACK, SLOW / FAST. ± 10 Vdc analog output: FEED / BACK, SLOW / FAST, with linear ramp. Possibility of installation on bench or built in. THESI 320 Two-axis position controller THESI 320 position controller can control shifting and positioning of two axes in 3 different operating modes: – MANUAL, by keyboard; – SEMI-AUTOMATIC, by keyboard; – AUTOMATIC, on the basis of a memorized program. End of program output. Independent axes as for configurations and parameters. 3 generic auxiliary inputs. Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position (the program cycle is composed by the position and its respective repetitions). 90 Vac to 230 Vac power supply or 24 Vac power supply with selector. Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in single-chip mode. Optoisolated inputs: START, STOP, INCREASE CYCLE, DEVIATION, PRESET. Voltage-free contact outputs: ENABLING WITH CONTROL INTERLOCK, OK POSITION, FEED / BACK, SLOW / FAST. ± 10 Vdc analog outputs: FEED / BACK, SLOW / FAST, with linear ramp. Possibility of installation on bench or built in.

No products available in this subcategory.

NS Series NS, the HMI brand you can rely on Machine Control at Your Fingertips. On-screen Machine Management. Even Simpler Equipment Operation with Outstanding Synergy.

POWER CLIPPER Utilizing a cost-effective Linux-based CPU, the Power Clipper will give you all the software and motion features from the Power PMAC within a low-cost, embedded solution.

Microspeed (MCS) | Microspeed Plus (MCSPLUS) MICRO B (MCB) and MICRO B PLUS (MCBPLUS) Panel mount analog DC motor servo drive with 20-275Vdc supply, for motors up to 11Nm.

ACCESSORIES FOR ROTARY ENCODERS Encoder Support Wire Systems Shaft-Encoder Couplings Metric Wheels  

Enquiry

LECA / Products / KEB Automation / C6 HMI

Product Number: —

EAN: —

Categories: KEB Automation

C6 HMI

KEB C6 HMI Operating panel KEB C6 HMI panels contain a wide range of functions made possible by our COMBIVIS HMI Studio visualization software. COMBIVIS is available in basic or advanced versions, depending on the application. Every panel has an aluminum frame with an IP66 protection rating. The top-of-the-line touch screens have brilliant displays with 16 million colors. A range of display formats are available. For added value each unit comes with remote maintenance functionality built in as standard.

Product Number: — EAN:

Select Variant Enquiry Now

Key Features:

Fast-drying formula for quick repairs
Non-conductive properties for electrical safety
Excellent media resistance
Professional grade quality
Works reliably even under water
Can be applied on wet surfaces

Product Description

<h2>Properties</h2>

<ul>
<li>Cost-effective display system </li>
<li>Multiple communication interfaces and drivers for a wide range of controls and drives </li>
<li>Integrated remote maintenance</li>
<li>Intelligent memory management with a large internal memory capacity</li>
</ul>

Data Sheet

View Data Sheet

Brochures

No brochures available.

Certificates

No certificates available.

Video

No product video available.

Review

There are no reviews yet.

Delivering reliable industrial automation solutions with quality you can trust.

Sitemap

Home
About Us
Enquiry
Contact Us
Buy Now

Contact

Address

#136 - 137/6, 8th Main, 3rd Phase, Peenya Industrial Area, Bangalore - 560 058

Phone

080 2674 4489
+91 87623 40775

info@leca.in
application@leca.in

Open in Maps ↗

Connect

Facebook
LinkedIn
Instagram
YouTube